Finding the Right Mirror Size
Keonjinn Mirror Size Guide
Choosing the Right Mirror Size
Measure the vanity. This page keeps the sizes that fit, then links the mirrors that sell each size.
Enter the width you measured
Uses only sizes from the product chart. Whole inches, from 24 to 84.
Or choose a chart row. Each size shows the mirrors that sell it. Enter a width to drop sizes wider than your vanity.
Enter a vanity width, or choose a chart row.
Measure the vanity, not the mirror you hope to buy
Run a tape across the front of the vanity the mirror will hang above, outside edge to outside edge. That number, in whole inches, is the vanity width on the chart.
A chart row is a range, not a list of equals
A row is a range. A 36" mirror belongs on a 36" vanity, not a 30" one. Keep the same width, or the next size down. Set aside anything wider.
These are industry conventions, not fixed standards. A same-width mirror aligns with the vanity edges for a built-in look; the next size down leaves a few inches of wall on each side, which makes room for sconces and keeps the wall balanced.
Check the Height Once You’ve Chosen the Width
As a general guide, position the bottom of the mirror 5–10 inches above the countertop, while leaving at least 3 inches above the highest point of the faucet. Raise the mirror as needed to meet the faucet clearance. Allow about 3 inches between the top of the mirror and the vanity light. If space is limited, choose a shorter mirror in your preferred width. Follow the installation instructions for your specific mirror.

One mirror. Center it on the vanity. Do not hang a mirror wider than the vanity.
Two mirrors. From 48" to 72", hang one over each sink. Each mirror is 20"–30" wide. Do not cut a one-mirror size in half.
The product-page chart, unchanged
Same table as the product page. 36", 48", 54", and 60" sit on two rows. Frontlit, backlit, frontlit & backlit, and the smart mirror share these sizes when the size is in the menu.
| Vanity Width | Recommended Mirror Size · One Mirror |
|---|---|
| 24"–36" | 20"×28"; 22"×30"; 24"×32"; 24"×36"; 28"×36"; 30"×36"; 36"×36" |
| 36"–48" | 28"×36"; 30"×36"; 36"×36"; 40"×24"; 40"×32"; 42"×36"; 48"×32"; 48"×36" |
| 48"–54" | 40"×24"; 40"×32"; 42"×36"; 48"×24"; 48"×32"; 48"×36"; 55"×30"; 55"×36" |
| 54"–60" | 48"×24"; 48"×32"; 48"×36"; 55"×30"; 55"×36"; 60"×36"; 60"×40" |
| 60"–84" | 55"×30"; 55"×36"; 60"×36"; 60"×40"; 72"×32"; 72"×36"; 84"×36" |
| Vanity Width | Recommended Mirror Size · Two Mirrors |
|---|---|
| 48"–54" | 20"×28"; 22"×30" |
| 54"–60" | 24"×32"; 24"×36"; 28"×36" |
| 60"–72" | 24"×32"; 24"×36"; 28"×36"; 30"×36" |
For a detailed walkthrough of the most common size, see What Size Mirror for a 36-Inch Vanity?
This chart is for the LED vanity mirrors
Bathroom mirror cabinets and framed wall mirrors are different products. Size them on their own pages.
Size availability: The chart shows sizes across Keonjinn LED mirror styles. Not every model offers every listed size. Check the size options on the selected product page before ordering.
Frequently Asked Questions
What size mirror fits a 36-inch vanity?
The 24"–36" chart row lists seven sizes: 20×28, 22×30, 24×32, 24×36, 28×36, 30×36 and 36×36 inches. For a 36-inch vanity, start with 36×36 for a same-width fit or 30×36 for a narrower option. A 28×36 mirror leaves 4 inches on each side when centered, but this does not guarantee enough clearance for wall sconces.
How should I read the vanity-width ranges in the chart?
Each row covers a range of vanity widths, not a set of sizes that fit every vanity in that range. Choose a mirror the same width as your vanity, if listed, or the next size down. Set aside any option wider than your measured vanity. Some boundary widths, including 36, 48, 54 and 60 inches, appear in two rows, so check both.
What size mirror fits a 42-inch vanity?
Use the 36"–48" chart row. For a same-width fit, choose 42×36; 40×24 and 40×32 leave about 1 inch on each side. Narrower options in the same row, such as 36×36, also work if you prefer more wall space on both sides. The 48-inch-wide options exceed the vanity width and should be excluded.
How much space should I leave between the mirror and nearby fixtures?
As a general guide, position the bottom of the mirror 5–10 inches above the vanity countertop, while keeping at least 3 inches between the mirror's bottom edge and the highest point of the faucet. Allow about 3 inches between the top of the mirror and the vanity light. If the faucet is tall, raise the mirror as needed to maintain clearance. Always follow the installation instructions for your specific mirror.
Should I use one mirror or two over a 60-inch double vanity?
Either layout can work. For two mirrors, the 54"–60" chart row lists 24×32, 24×36 and 28×36 inches per mirror. Since 60 inches also marks the start of the 60"–72" row, 30×36 is another listed option. Two 30-inch-wide mirrors use the full 60 inches, leaving no space between them if placed side by side. Center each mirror over its sink.
What size mirrors work for a 72-inch double vanity?
For two mirrors, the chart lists 24×32, 24×36, 28×36 and 30×36 inches per mirror. If you prefer one continuous mirror, the single-mirror chart includes 72×32 and 72×36 inches.
Can I install a mirror vertically instead of horizontally?
Only if the selected model supports both orientations. The chart uses width × height, so a 40×24-inch mirror becomes 24 inches wide and 40 inches tall when installed vertically. Use its installed horizontal width to determine the vanity-width range, and check the product's installation instructions before changing its orientation.
Should I measure the vanity cabinet or the countertop?
Measure the finished vanity width from outside edge to outside edge across the front. If the countertop extends beyond the cabinet, use the countertop's outer edge as the reference. Do not measure the sink, cabinet doors or an existing mirror.









